2 week deliveries now available supply chain issues have been resolved!
|
|
|
These Corvettes have the Dragvette 6 LInk Advantage
SAVE OR MAKE MONEY! here's how.
We want more installation videos on this site. One for every product. It makes for a better customer experience. We are busy making products for our great customers. Make a video of you installing one of our products on your Corvette. It doesn't have to be a recent purchase. How much can you make? The minimum is $25.00. It could be a three minute video for some products. The video needs good picture quality, clear sound and accurate information. I know how long it takes to make a quality video so $250.00 is not out of the question. If you love Corvettes and like videography this is a great opportunity for you.
Call Toll Free 877-422-0943
SAVE OR MAKE MONEY! here's how.
We want more installation videos on this site. One for every product. It makes for a better customer experience. We are busy making products for our great customers. Make a video of you installing one of our products on your Corvette. It doesn't have to be a recent purchase. How much can you make? The minimum is $25.00. It could be a three minute video for some products. The video needs good picture quality, clear sound and accurate information. I know how long it takes to make a quality video so $250.00 is not out of the question. If you love Corvettes and like videography this is a great opportunity for you.
Call Toll Free 877-422-0943
|
|
|
Watch the video of the Dragvette 6 Link in action! Racers center section with Tom's 30 Spline Axle's
Optional Dragvette inner axles are available for this unit
Optional Dragvette inner axles are available for this unit
Welcome to the Dragvette Products website.
All "Dragvette Products" were developed at the raceway to solve problems that I encountered with my STOCK IRS 10.81 quarter mile Corvette. You can bet the 1.45 sixty foot times has given the 'Dragvette 6-Link Suspension System' the ultimate real world test. Time after time! Let the Dragvette 6-Link and our Corvette products put the fun back into drag racing by solving your safety, consistency, traction and breakage problems.
You are making your purchase direct from the manufacture. The first product we developed and produced is the "Half shaft safety loop". The second our "Drive shaft safety loop." Our third is the "Dragvette 6-Link" we build bullet proof rear ends for the Corvette with a 2 full years 100% replacement warranty. No bullshit pro rating. You break it send it to us and we send you a brand new one. We expect our parts to be abused so drive it like you stole it.
Once again the pandemic supply chain is interrupted 4:11 gears are simply nowhere to be found I called over 20 distributors and found some 4:56 ratios that I purchased for stock. We also have a good supply source for 4:33's there will not be any 4:11's until the summer of 2022. It is a possibility manufactures may never tool up for the 1963-79 Corvette ring and pinion market. They are only interested in the more common gear sets for rear ends, an example is the Dana 60 twelve bolt. So to supply my customers with the 4:11 ratio for there Corvettes Racevette is developing its own 12 bolt for the Corvette. We currently have our first 4:11 spool 70% complete. The 12 bolt will also be offered with a limited slip differential and the super strong Dragvette Hy Tuff 30 spline inner axle. These should come in under
Exciting new 6 link for 1980-82 Corvettes check out the store.
Two week shipment from day of order available for "Racers Rear End" do to supply chain resolutions excludes 4:11 ratio.
Established 01/01/2000 Updated: AUG/09/21
All "Dragvette Products" were developed at the raceway to solve problems that I encountered with my STOCK IRS 10.81 quarter mile Corvette. You can bet the 1.45 sixty foot times has given the 'Dragvette 6-Link Suspension System' the ultimate real world test. Time after time! Let the Dragvette 6-Link and our Corvette products put the fun back into drag racing by solving your safety, consistency, traction and breakage problems.
You are making your purchase direct from the manufacture. The first product we developed and produced is the "Half shaft safety loop". The second our "Drive shaft safety loop." Our third is the "Dragvette 6-Link" we build bullet proof rear ends for the Corvette with a 2 full years 100% replacement warranty. No bullshit pro rating. You break it send it to us and we send you a brand new one. We expect our parts to be abused so drive it like you stole it.
Once again the pandemic supply chain is interrupted 4:11 gears are simply nowhere to be found I called over 20 distributors and found some 4:56 ratios that I purchased for stock. We also have a good supply source for 4:33's there will not be any 4:11's until the summer of 2022. It is a possibility manufactures may never tool up for the 1963-79 Corvette ring and pinion market. They are only interested in the more common gear sets for rear ends, an example is the Dana 60 twelve bolt. So to supply my customers with the 4:11 ratio for there Corvettes Racevette is developing its own 12 bolt for the Corvette. We currently have our first 4:11 spool 70% complete. The 12 bolt will also be offered with a limited slip differential and the super strong Dragvette Hy Tuff 30 spline inner axle. These should come in under
Exciting new 6 link for 1980-82 Corvettes check out the store.
Two week shipment from day of order available for "Racers Rear End" do to supply chain resolutions excludes 4:11 ratio.
Established 01/01/2000 Updated: AUG/09/21