Trailing Arms for 1963-82 Corvettes
Install the TA-06 Van Steel trailing arms with a single offset on your 63-82 Corvette to make room for a wider tire, or go all the way with a TA-06D double offset trailing arm to maximize tire clearance. The double offset is offset in the front like the TA-06 but is is also offset in the back. The hole for the 9/16 by 6" long screw that supports the rear spring is moved in 1" to allow for the installation of a shortened spring. This in turn allows you to utilize all of the extra clearance that is put in the front of the trailing arm as the stock rear spring can interfere with a wider tire that will fit the first offset. These are sold in pairs and are priced per pair. Order our shortened spring for use with the TA-06D trailing arms.